Victoria Sampler

Woodland Babies


These sweet little Woodland Babies are waiting for you to stitch them for Christmas! (Baby Squirrel is in the JCS ornament issue) All three are finished in  Tiny Tartlet Tins.  Thread/embellishment pack available (see below).

Design size: 32 x 33 (each) - 2.3 x 2.35" on 28 ct linen over 2 threads.

Models stitched on Cashel Dirty Linen.

Out of Stock - may be special ordered

Add to favorites
You must be logged in
Add to wishlist
You must be logged in

The sweet little baby Bunny, Chipmunk and Raccoon are waiting for you to stitch for Christmas!  Baby Squirrel is in the JCS ornament issue, and all are the same size and finished the same way, in our Tiny Tartlet Tins..!  Each one of these adorable baby animals are waiting for their own Christmas in the snow, surrounded by a wreath of fir boughs separated by tiny red buttons!

In the olden days, you could always find a Tinsmith working to create candleholders, pails, and other essential tools. Cathy has used the same shiny metal tart tins to finish her ornaments so they look authentically rustic. Stitch all 3 Woodland Babies in this chart, and the matching squirrel from the 2011 JCS Ornament Issue and finish using our Tart Tins. In the main Accessory Pack you’ll find all the threads, beads and tiny red buttons and in the Tartlet Pack you'll find four Tartlet tins to finish! 

All Tartlet ornaments are quick and easy to stitch to keep or give as gifts. They are designed with gentle overdyed cottons and many different silks in soft shades. Stitch  and finish in tartlet tins as Cathy Jean did, or use your own imagination! Collect ALL four.. and enjoy stitching your Woodland Babies this Christmas!  


FINISHING SUGGESTIONS: Tart Tin Ornament: Cut a round piece of 4 ply mat board 2 1/2" in diameter. Glue quilt batting on mat board, let dry and trim. Note: For extra loft place a smaller piece of batting down first then the larger piece on top. Center the design over batting side of matboard and anchor with straight pins. Clip curving corners, and glue raw edges on back of mat board. Let dry for 2 - 4 hours. Glue a 1 1/2" x 1" x 3/4" piece of styrofoam in the bottom of the tin. Spread a thin layer of glue on the wrong side of matboard. Place stretched design glue side down inside the tart tin on top of the styrofoam. Let dry 2 - 4 hours. Glue ribbon to back of tart tin for the hanger. Ornament: Cut two pieces of matboard about 1/8" larger than stitched design. Glue quilt batting on each piece of matboard, let dry and trim. Center the design over batting and anchor with straight pins. Clip curving corners, glue raw edges on back of mat board. Repeat on second piece of matboard using a fabric of your choice. Glue both pieces wrong sides together. Glue cording around outside edges to finish off. Making a hanger at the top and tassel at bottom. Greeting Card: apply a piece of iron-on interfacing to the back, trim the fabric to size and insert.

No customer reviews for the moment.

Write your review